The installation spacing for aluminum skirting board mounting clips is a critical factor that directly determines the firmness, smoothness, and lifespan of the skirting board after installation.
Aluminum skirting board (https://www.innomaxprofiles.com/aluminum-skirting-boards/)
According to industrial standards and practical experience, the recommended installation spacing for aluminum skirting board mounting clips is 40-60 centimeters.
This is a universal and safe range, but adjustments should be made based on the actual situation during specific operations.
Detailed Installation Spacing Recommendations
1.Standard Spacing: 50 cm
● This is the most common and recommended spacing. For most walls and standard lengths of aluminum skirting board (usually 2.5 meters or 3 meters per piece), a 50 cm spacing provides optimal support and stability, ensuring the skirting board fits tightly against the wall without bulging or becoming loose in the middle.
2.Reduced Spacing: 30-40 cm
● It is recommended to reduce the spacing to 30-40 cm under the following circumstances:
● Uneven Walls: If the wall has slight imperfections or is uneven, closer mounting clip spacing can help use the clip's elasticity to better "pull" the skirting board flat, compensating for the wall's defects.
● Very Narrow or Very Tall Skirting Boards: If using very narrow (e.g., 2-3cm) or very tall (e.g., over 15cm) aluminum skirting boards, denser mounting clip spacing is needed to ensure the top and bottom edges adhere properly.
● Pursuing Premium Results: For projects demanding the highest installation quality where absolute certainty is desired.
3.Maximum Spacing: Do not exceed 60 cm
● The spacing should absolutely not exceed 60 cm. Excessive spacing will cause the middle section of the skirting board to lack support, leading to:Increased susceptibility to deformation: Makes it easier to dent upon impact.
● Poor adhesion: Creating gaps between the skirting board and the wall, affecting aesthetics and hygiene (dust accumulation).
● Noise generation: May produce clicking sounds due to thermal expansion/contraction or vibration.
aluminum skirting profile (https://www.innomaxprofiles.com/aluminum-skirting-boards-slim-product/)
Mandatory Mounting Clip Placement at Key Points
In addition to evenly distributed clips, key points must have clips installed, and they should be placed no more than 10-15 cm from the end or joint:
●Each end of the skirting board: A mounting clip must be installed approximately 10-15 cm from each end.
●Both sides of a joint: Mounting clips must be installed on both sides of where two skirting boards meet to ensure a firm and seamless connection.
●Corners: Mounting clips are needed on both the inside and outside of internal and external corners.
●Special locations: Areas like large switches/sockets or places that might be frequently bumped should have additional mounting clips installed.
recessed skirting board (https://www.innomaxprofiles.com/aluminum-skirting-board-recessed-product/)
Brief Installation Process Overview
1.Plan and Mark: Before installation, use a tape measure and pencil to mark the installation position of each mounting clip on the wall, following the spacing and key point principles above.
2.Install Mounting Clips: Secure the mounting clip bases to the wall using screws (typically provided). Ensure all mounting clips are installed at the same height (use a level to draw a reference line).
3.Install Skirting Board: Align the aluminum skirting board with the mounting clips and press firmly from top to bottom or from one end to the other with the palm of your hand until a "click" sound indicates it is locked into place.
4.Handle Joints and Corners: Use professional internal/external corner pieces and connectors for a perfect finish.
Summary Recommendations
| Scenario Description | Recommended Clip Spacing | Notes |
| Standard Scenario (Flat wall, standard height skirting) | 50 cm | The most balanced and universal choice |
| Uneven Wall or Very Narrow/Tall Skirting | Reduce to 30-40 cm | Provides better leveling force and support |
| Maximum Allowable Spacing | Do not exceed 60 cm | Risk of loosening, deformation, and noise |
| Key Points (Ends, Joints, Corners) | 10-15 cm | Must be installed to ensure key areas are secure |
LED skirting board (https://www.innomaxprofiles.com/aluminum-led-skirting-board-product/)
Finally, be sure to consult the installation instructions provided by the manufacturer of your specific skirting board brand, as mounting clip designs can vary slightly between different brands and product lines. The manufacturer will provide the installation guidance that best matches their product.
Post time: Sep-30-2025